Extend the range of rear toe adjustment by ±1.5° on the rear of the Chrysler LX platform by installing SPC's offset bushing. The OE rear toe cam on the Challenger, Charger, 300, Magnum, and Pacifica gives you a ±1.0° window of adjustment. This is often not enough, especially if the suspension has been modified. Simply replace the OE bushing with SPC's offset bushing and use the factory cam to fine tune adjustment. The OE toe link is difficult to remove because the inner bolt is trapped. this kit is designed to replace the outer bushing while the arm is still on the car to save time. The OE bushing can be pressed out and the SPC bushing pressed in using p/n 40910 bushing press and p/n 66025 press adapter kit or bushing press set p/n 40940. Do you need camber change as well? Use SPC p/n 66050 for ±1.5° of rear camber adjustment.
Alignment Toe Bushing Kit
Notes- Toe: plus or minus 1.5 Degrees
Documents
Attributes
California Proposition 65: | WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, or other reproductive harm. |
Package Information
Orderable Status:YesQuantity:1Package UOM:Smallest Pack (Consumer Level)Package Level GTIN:00082642660552Weight Variance:0.000000000Stacking Factor:0Inner Quantity:0
Extended Information
Core Return Days to Expiry:0Country of Origin (Primary):CNEmission Code:Legal USHarmonized Tariff Code (HTS):8708806590Life Cycle Status Code:Available to OrderLife Cycle Status Description:Available to OrderMaximum Cases per Pallet Layer:4MSDS Required Flag:NoNational Popularity Code:Non-Stock ItemNational Popularity Description:Non-Stock ItemPallet Layer Maximum:4Taxable:YesWarranty Special:LTD LIFETIMEWarranty Special UOM:Text Warranty Message